![background image](http://html1.mh-extra.com/html/troy-bilt/25a-304-766/25a-304-766_operators-manual_1172926023.webp)
23
MOVING THE UNIT
1. Stop the engine.
2. Tilt the unit back slightly to bring the blade off the ground.
3. Push or pull the unit to the next location.
WARNING:
To prevent serious personal injury, always stop the engine when operation
is delayed or when moving the unit from one location to another.
WARNING:
To prevent serious personal injury, never pick up or carry the unit while the
engine is running.
MAINTENANCE
MAINTENANCE SCHEDULE
Perform these required maintenance procedures at the frequency stated in the table. These procedures
should also be a part of any seasonal tune-up.
NOTE:
Some maintenance procedures may require special tools or skills. If you are unsure about these
procedures, take the unit to an authorized service dealer. Refer to the
Service / Warranty
Supplement
for more information.
NOTE:
Maintenance, replacement, or repair of the emission control devices and system may be
performed by an authorized service dealer. Refer to the
Service / Warranty Supplement
for more
information.
NOTE:
Please read the California/EPA statement that came with the unit for a complete listing of
terms and coverage for the emissions control devices, such as the spark arrestor, muffler,
carburetor, etc.
WARNING:
To avoid serious personal injury, always stop the engine and allow it to cool
before cleaning or maintaining the unit. Never perform cleaning or maintenance while the
unit is running. Disconnect the spark plug wire to prevent the unit from starting accidentally.
WARNING:
Wear protective clothing and observe all safety instructions to prevent
serious personal injury.
FREQUENCY
MAINTENANCE REQUIRED
Every 10 hours
•
Clean and re-oil the air filter. Refer to
Maintaining the Air Filter
.
After the first 10 hours
and at 38 hours
•
Change the oil. Refer to
Changing the Oil
.
•
Have the rocker arm clearance checked by an authorized service dealer.
•
Check the spark plug condition and gap. Refer to
Maintaining the
Spark Plug
.
Summary of Contents for 25A-304-766
