EN
9
dehumidifier TTR 50 E
Setting the desired relative room humidity
You can set a desired relative room humidity level of 50 %
or 60 %. To do so, please proceed as follows:
1. Press the
Humidity
button (
15
) until the desired room
humidity level has been set.
ð
The humidity level indication (
29
) shows the value for
the current room humidity level.
Continuous operation
The device dehumidifies the air constantly and regardless of the
relative humidity.
The desired relative room humidity cannot be adjusted in this
operating mode.
1. Press the
Humidity
button(
15
) until the
Continuous
LED (
28
) is illuminated.
Ionization function
With this function, the room air is not only cleaned by means of
the air filter, but additionally by means of anions. The released
anions remove pollen, dust, viruses and bacteria from the room
air.
1. Press the
Anion
button (
12
).
ð
The
Anion
LED (
11
) is illuminated.
ð
The ionization function is switched on.
2. Press the
Anion
button (
12
) again to deactivate the
ionization function.
ð
The
Anion
LED (
11
) goes out.
Swing function
With the swing function being switched on, the air flaps move
automatically and ensure continuous air circulation. The air
circulates out of the device from the top.
1. Press the
Swing
button (
10
).
ð
The
Swing
LED (
9
) is illuminated.
ð
The swing function is activated.
2. Press the
Swing
button (
10
) again to deactivate the swing
function.
ð
The Swing LED (
9
) goes out.
Setting the timer
For the device to switch off automatically after a predefined
number of hours (2, 4 or 8 hours) you can program the timer.
Note
The device must not be left unattended in a freely
accessible room with an activated timer.
Automatic switch-off
ü
The device is switched on.
1. Press the
Timer
button (
18
) until the 2 h Timer LED (
17
),
the 4 h Timer LED (
16
) or the 8 h Timer LED (
27
) is
illuminated.
ð
After the predefined time, the device switches itself off.
Notes regarding automatic switch-off:
•
Manually switching the device off disables the automatic
switch-off function.
•
The device switches off automatically when the
condensation tank is full, even if the timer is active. Once
the water tank has been emptied, the device continues
counting down the remaining hours of the timer.
Operation with hose attached to the condensation
connection
At a high humidity level it is recommendable to constantly drain
the condensate via a hose, for otherwise the condensation tank
has to be emptied too frequently. The hose is not included in the
scope of delivery.
To do so, proceed as follows:
ü
A suitable hose (diameter: 14 mm) is ready for use.
ü
The device is switched off.
1. Remove the condensation tank (
5
) with cover (
30
).
5
30
