Speedy 360
BA 8032_2.2_EN (05/2016)
62 / 90
www.troteclaser.com
8.6
Switch laser source manually
The switch between the CO
2
and fiber laser source is performed either manually by pressing a
shortcut on the operation panel or as result of JobControl
®
software settings.
Procedure to which between the CO
2
and fiber laser source manually:
1) After referencing of the
machine press "Standby".
2a)
CO
2
Mode:
To change to the CO
2
mode,
press both "X/Y position laser
head" buttons of the X-axis
simultaneously.
2b)
Fiber Mode:
To change to the fiber mode,
press both "X/Y position laser
head" buttons of the Y-axis
simultaneously.
