background image

1

EN

cordless screwdriver with bit magazine PSCS 11-3,6V

Table of contents

Notes regarding the instructions .......................................... 1

Safety ..................................................................................... 2

Information about the device................................................ 6

Transport and storage........................................................... 7

Start-up.................................................................................. 8

Operation ............................................................................. 11

Available accessories.......................................................... 12

Errors and faults.................................................................. 12

Maintenance ........................................................................ 13

Disassembly......................................................................... 13

Disposal ............................................................................... 14

Declaration of conformity ................................................... 14

Notes regarding the instructions

Symbols

Warning of electrical voltage

This symbol indicates dangers to the life and health of
persons due to electrical voltage.

Warning of explosive substances

This symbol indicates dangers to the life and health of
persons due to potentially explosive substances.

Warning

This signal word indicates a hazard with an average
risk level which, if not avoided, can result in serious
injury or death.

Caution

This signal word indicates a hazard with a low risk
level which, if not avoided, can result in minor or
moderate injury.

Note

This signal word indicates important information (e.g.
material damage), but does not indicate hazards.

Info

Information marked with this symbol helps you to carry
out your tasks quickly and safely.

Follow the manual

Information marked with this symbol indicates that the
instructions must be observed.

Wear safety glasses

Information marked with this symbol indicates that you
should wear eye protection.

Wear a protective mask

Information marked with this symbol indicates that you
should wear a protective mask.

You can download the current version of the instructions and
the EU declaration of conformity via the following link:

PSCS 11-3,6V

https://hub.trotec.com/?id=39470

Summary of Contents for PSCS 11-3,6V


















Reviews: