Trotec PSCS 11-3,6V, Original Instruction

Page: 10 / 17

9 EN cordless screwdriver with bit magazine PSCS 11-3,6V
Checking the battery status
The battery status is displayed as follows by the three LEDs of
the battery level indication (4):
LED colour Meaning
Green – Orange – Red maximum charge / power
Orange – Red medium charge / power
Red weak charge – Recharge the
battery.
1. Press the on / off switch (11).
ð You can read the battery status from the battery level
indication (4).
Changing tools
Note
To avoid damaging the gear, set the switch for
clockwise / counter-clockwise rotation (5) to centre
position (lock). The on / off switch (11) can also be
operated when the slide switch for bit exchange (3) is
pushed out.
The device is equipped with a bit magazine with locking
mechanism for hexagon bits. Please proceed as follows to
remove or insert tools:
1. Set the switch for clockwise/counter-clockwise rotation (5)
to centre position (lock).
2. Pull the slide switch for bit exchange (3) forward.
ð
The current bit is pushed into the bit magazine (12).
3 12
2
3. Select the desired bit by rotating the bit magazine (12) to
the left or right.
ð
The currently selected bit can be seen in the window (2)
in an enlarged view.
2
12
4. Pull the slide switch for bit exchange (3) back.
ð
The current bit is pushed out of the bit magazine (12)
into the magnetic bit holder (1).