EN
4
cordless screwdriver with bit magazine PSCS 11-3,6V
Device-specific safety warnings for cordless
screwdrivers
Wear eye and mouth protection when processing
materials that may contain harmful substances (e.g.
asbestos).
•
Secure the workpiece with tensioning devices or a vice.
•
Hold the power tool firmly. When tightening or loosening
screws, high reaction torques can occur temporarily.
•
Immediately switch off the power tool if the insertion tool
blocks. Beware of high reaction torques causing a
kickback.
•
Hold power tool by insulated gripping surfaces when
performing an operation where the cutting accessory
may contact hidden wiring.
Cutting accessory contacting
a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
•
For any work on the device, as well as during transport or
storage, set the switch for the rotational direction to centre
position (locked). This prevents unintentional starting of the
power tool.
•
Wait until the power tool has come to a standstill, before
putting it down.
Intended use
Only use the device
PSCS 11-3,6V
for screwing in and loosening
screws, while adhering to and following the technical data.
We recommend using the power tool with original Trotec
accessories.
Improper use
The device is not intended for drilling.
Personnel qualifications
People who use this device must:
•
have read and understood the instructions, especially the
Safety chapter.
Personal protective equipment
Wear eye protection.
With it you protect your eyes from splintering, falling
and flying pieces which could cause injuries.
Wear a protective mask.
It saves you from inhaling harmful dusts generated
when processing workpieces.
Summary of Contents for PSCS 11-3,6V
Page 16: ......
