background image

EN

14

cordless screwdriver with bit magazine PSCS 11-3,6V

Disposal

The icon with the crossed-out waste bin on waste

electrical or electronic equipment stipulates that this equipment
must not be disposed of with the household waste at the end of
its life. You will find collection points for free return of waste
electrical and electronic equipment in your vicinity. The
addresses can be obtained from your municipality or local
administration. For further return options provided by us please
refer to our website www.trotec24.com.
The separate collection of waste electrical and electronic
equipment aims to enable the re-use, recycling and other forms
of recovery of waste equipment as well as to prevent negative
effects for the environment and human health caused by the
disposal of hazardous substances potentially contained in the
equipment.

Li-Ion

In the European Union, batteries and accumulators must not be
treated as domestic waste, but must be disposed of
professionally in accordance with Directive 2006/66/EC of the
European Parliament and of the Council of 6 September 2006
on batteries and accumulators. Please dispose of batteries and
accumulators according to the relevant legal requirements.

Declaration of conformity

The text below sets out the contents of the declaration of
conformity. The signed declaration of conformity can be found
at 

https://hub.trotec.com/?id=39470

.

Declaration of conformity

In accordance with the EC Machinery Directive 2006/42/EC, Annex II, Part 1,

Section A

Herewith, we – Trotec GmbH & Co. KG – declare that the
machinery designated below was developed, constructed and
produced in compliance with the requirements of the
EC Machinery Directive in the version 2006/42/EC.

Product model / Product:

PSCS 11-3,6V

Product type:

cordless screwdriver with bit
magazine

Year of manufacture as of:

2016

Relevant EU directives:

2014/30/EU: 29 March 2014

Applied harmonised standards:

EN ISO 12100:2010

EN 55014-1:2006/A1:2009 + A2:2011

EN 60745-1:2009 + A11:2010

EN 60745-2-2:2010

Applied national standards and technical specifications:

AfPS GS 2014:01 PAK

Manufacturer and name of the authorised representative of
the technical documentation:

Trotec GmbH & Co. KG
Grebbener Straße 7, D-52525 Heinsberg
Phone: +49 2452 962-400
E-mail: [email protected]

Place and date of issue:
Heinsberg, 

01.06.2016

Detlef von der Lieck, Managing Director

Summary of Contents for PSCS 11-3,6V


















Reviews: