EN
10
cordless screwdriver with bit magazine PSCS 11-3,6V
Filling the bit magazine
You can fill the bit magazine with up to 6 bits (25 mm).
1. Set the switch for clockwise/counter-clockwise rotation (5)
to centre position (lock).
2. Pull the slide switch for bit exchange (3) forward.
ð
The current bit is pushed into the bit magazine (12).
3
12
2
3. Remove the bit magazine (12) from the device by pushing
the bit magazine out to the left.
12
14
4. Take the bit magazine (12) off the holder (14).
5. Remove bits which are no longer needed from the bit
magazine (12).
6. Fill the desired bits into the bit magazine (12). Make sure
that the bit tips point to the front.
7. Place the bit magazine (12) back on the holder (14). The bit
magazine (12) has a thicker edge at the front so that it can
only be placed on in one direction.
8. Push the bit magazine (12) back into the device.
9. Select a bit if required.
10. Pull the slide switch for bit exchange (3) back.
ð
The current bit is pushed out of the bit magazine (12)
into the magnetic bit holder (1).
Summary of Contents for PSCS 11-3,6V
Page 16: ......
