EN
10
Operating manual – portable circular saw PCSS 10-1400
Adjusting the cutting angle
You can adjust the cutting angle in the range from 0° to 45°.
Info
For mitre cuts, the cutting depth is smaller than the
value shown on the cutting depth scale.
1. Loosen the wing screw for the cutting angle (5).
28
5
2. Set the desired cutting angle on the cutting angle
scale (28).
3. Retighten the wing screw (5).
4. Note that the cutting line runs along between the notches
on the base plate marked
0
and
45
, depending on the
cutting angle setting. In the example below, the cutting
angle is set to 45°:
