13
EN
Operating manual – portable circular saw PCSS 10-1400
16. Refit the clamping flange (18) on the saw blade clamp (31).
In doing so, make sure to insert the clamping flange as
shown below (convex side to the outside).
18
17. Place the clamping screw (19) together with the
washer (29) onto the clamping flange (18).
18. Press and hold the spindle lock (26).
26
14
19. Tighten the clamping screw (19) by means of the Allen
wrench (14).
20. Let go of the spindle lock (26).
21. Place the Allen wrench (14) back into the holder.
22. Check whether the saw blade is properly locked in place.
