9
EN
Operating manual – portable circular saw PCSS 10-1400
Start-up
Unpacking the device
•
Take the device and the accessories out of the packaging.
Warning of electrical voltage
Electric shock from insufficient insulation.
Check the device for damages and proper functioning
before each use.
If you notice damages, no longer use the device.
Do not use the device when the device or your hands
are damp or wet!
•
Check the contents for completeness and look for
damages.
Warning
Risk of suffocation!
Do not leave the packaging lying around. Children may
use it as a dangerous toy.
•
Dispose of the packaging material according to the
national regulations.
Adjusting the cutting depth
In the 0° position, the cutting depth can be set in the range from
0 mm to 65 mm.
Info
The cutting depth should exceed the material thickness
by approx. 3 mm so that a little less than the total tooth
height is visible below the workpiece.
1. Release the locking lever (10).
2. Set the desired cutting depth on the cutting depth
scale (27).
27
10
3. Lock the locking lever (10) again.
