Operating manual – Infrared camera
B -
22
LCD monitor
Use a lens blower brush to remove dust and dirt. If ne-
cessary, gently wipe the LCD monitor with soft cloth or
an eyeglass lens wiper to remove stubborn dirt.
Never rub or press forcefully on the LCD monitor. These
actions may damage it or lead to other problems.
Never use thinners, benzene, synthetic cleaners or water
to clean the camera. These substances may distort or
damage the equipment.
10. TROUBLES SHOOTING
Problem
Cause
Solution
Camera will not operate.
Power is not turned on.
Turn on the camera.
See Turning the Power On / Off.
Insuffi cient battery voltage.
Fully charge the battery.
Poor contact between camera and
battery terminals.
Wipe the terminals with a clean,
dry cloth.
Camera will not record.
Internal memory is full
Erase some images to make
some space.
Internal memory not formatted
correctly.
Format the memory
in FAT 32 format.
Battery pack consumed quickly.
Battery pack capacity reduced
because of disuse for one year or
more after being fully charged.
Replace the battery pack with a
new one.
Battery life exceeded.
Replace the battery pack.
Battery pack will not charge.
Poor contact between battery pack
and battery charger.
Clean the battery terminals with
clean cloth. Connect the power
cord to the battery charger and
insert its plug fi rmly into the
power outlet.
Battery life exceeded.
Replace the battery pack.
