Operating manual – Infrared camera
B -
2
01. READ THIS FIRST
Test Shots
Before you try to shoot important subjects, we high-
ly recommend that you shoot several trial images to
confi rm that the IR camera is operating and being
operated correctly.
Please note that Trotec
®
, its subsidiaries and affi lia-
tes, and its distributors are not liable for any conse-
quential damages arising from any malfunction of an
IR camera or accessory that results in the failure of
an image to be recorded or to be recorded in a format
that is machine readable.
Warning Against Copyright Infringement
Safety Precautions
Before using the camera, please ensure that you read
and understand the safety precautions described
below. Always ensure that the IR camera is operated
correctly.
The safety precautions noted on the following pages
are intended to instruct you in the safe and correct
operation of the IR camera and its accessories to pre-
vent injuries or damage to yourself, other persons and
equipment
Warnings
Read on to learn about using IR camera properly.
- Avoid damaging eyesight
Do not trigger the laser pointer in hu-
man or animal eyes. Exposure to the la-
ser produced by the laser pointer may
damage eyesight.
- Do not disassemble
Do not attempt to disassemble or alter any part of
the equipment that is not expressly described this
guide.
- Stop operating immediately if it emits smoke or
noxious fumes
Failure to do so may result in fi re or electrical shock.
Immediately turn the IR camera’s power off, remove
the IR camera battery or unplug the power cord from
the power outlet. Confi rm that smoke and fume
emissions have ceased.
- Stop operating immediately if it is dropped or the
casing is damaged.
Failure to do so may result in fi re or electrical
shock. Immediately turn the IR camera’s power off,
remove the IR camera battery or unplug the power
cord from the power outlet.
- Do not use substances containing alcohol, benzene,
thinners or other fl ammable substances to clean or
main the IR camera.
The use of these substances may lead to fi re.
- Remove the power cord on a regular periodic basis and
wipe away the dust and dirt that collects on the plug, the
exterior of the power outlet and the surrounding area.
In dust, humid or greasy environments, the dust that
collects around the plug over long periods of time
may become saturated with humidity and short-
circuit, leading to fi re.
- Do not handle the power cord if your hands are wet.
Handling it with wet hands may lead to electrical
shock. When unplugging the cord, ensure that you
hold the solid portion of the plug. Pulling on the fl e-
xible portion of the cord may damage or expose the
wire and insulation, creating the potential for fi res
and electrical shocks.
- Do not cut, alter or place heavy items on the power
adapter cord.
Any of these actions may cause an electrical short
circuit, which may lead to fi re or electrical shock.
- Use only the recommended power accessories.
Use of power sources not expressly recommended for
this IR camera may lead to overheating, distortion of
the IR camera, fi re, electrical shock or other hazards.