Operating manual – Infrared camera
B -
20
Installing the driver
Attach the supplied USB cable (supplied) to the
computer’s USB port and the camera’s USB terminal. Set
the SAT real-time disk (optional) to the CD-ROM driver.
Users of Windows XP Professional /
Windows 2000 must fi rst log in as
an Administrator (computer system
administrator) to install programs.
1. After a few moments,
the following dialog
will appear.
2. Select [No, not this time]
then click [Next >].
3. Select [Install from a list
or location (Advanced)]
then click [Next >].
4. Select [Include this lo-
cation in the search:]
then click [browse].
Locate the directory of
the driver, and click
[OK] to return to the
previous window.
Then click [Next >].
5. Click [Continue Anyway].
6. Click [Finish] to fi nish
the driver installation.
Transfer Video via USB
You can transfer infrared video to a computer directly via
the USB by the optional real-time software.
1. Power on the computer.
2. Connect the camera and computer via USB cable.
3. The operation system will recognize the camera as a
mass storage device. The camera will install to you
computer without any additional driver.
4. You can see the thermal
video, analyze it real-
time and record it in your
disk via the software.
Troubles shooting
When you have any problems in the process of connec-
ting the IR camera to a computer to use optional real-
time software, check this fi rst.
First, Check the Following:
1. Does your computer comply with these requirements?
Ensure the system has a built-in USB2 port and it comes
with Windows XP preinstalled.
The USB interface is not supported for systems not
complying with the above conditions.
2. Is the camera correctly connected to the computer?
See „Connecting to a computer“
3. Is the battery charged suffi ciently? You should use a
household power source to powerthe camera when it
is connected to a computer (optional!).
4. If the USB Driver is not correctly installed, it is possible
that Windows is not recognizing the USB Driver.