B
-
17
Operating manual – Infrared camera
4. The name of saving
image will be dis-
played on the screen.
Voice recording
1. Install the Bluetooth (optional) headset.
2. Freeze an image, the
Press the MENU/
ENTER key.
3. Press the
▲
UP/
DOWN
▼
arrow on
the omni selector to
select the [File] menu.
4. Press
▲
UP/DOWN
▼
arrow on the
omni selector to select
[VoiceREC.], then
press the Menu/Enter
key. The [Voice Recor-
ding] message will ap-
pear on the LCD monitor.
5. Speak toward the microphone of the headset. To stop
recording, press the C key.
6. Save the image.
Trigger settings
The trigger can be set to perform a variety of different
functions: it can be used to store images or to switch
the laser or the illumination on and off.
1. Press the MENU/EN-
TER-key and then the
arrow
▲
UP / DOWN
▼
on the omni-se-
lector to get to the
menu item [Lighter
on] and press the
MENU/ENTER-key.
2. Press the Up and Down arrow on the omni selec-
tor to select the [Others] menu, and then press the
MENU/ENTER key.
Information on the trigger
Save:
Saves the image.
Laser on
: The laser can be activated by pressing the
trigger.
Light on
: The illumination can be activated by pressing
the trigger.
06. PLAYBACK AND ERASE
Opening Images
You can view and analyze the recorded images on the
LCD monitor.
1. Press the MENU/ENTER key.
2. Press the
▲
Up and
Down
▼
arrow on the
omni selector to select
the [File] menu.
3. Press
▲
Up and Down
▼
arrow on the
omni selector to select
[Open], then press the
Menu/Enter key.
4. Select an image then
press MENU/ENTER key
to open it. How to se-
lect an image.
How to select an image
1. After you select [Open] or [Delete] option under [File]
menu, a message shown as below will appear in the
lower left of the screen.
