Factory Settings: On
Press and hold the [Setting] button, then press the [Cover Flip] button to turn the
automatic cover flip function on/off.
It will not open the cover automatically when you are close to it if the automatic cover flip
function is off (it will give a short beep instead).
It will open the cover automatically when you are close to the toilet if the automatic cover
function is on (a long beeping sound will be heard).
Seat Flip Function
When the user is leaving the seat, press the [Seat Flip] button to open or close the
seat. If the seat is closed, it will open the seat and the cover together.
It will open the cover and the seat automatically one by one when you are close to it if the
automatic seat flip function is set in the Fully Open Mode.
Note: The automatic seat flip function is valid only when the cover and the seat is closed.
Setting The Automatic Seat Flip Function
Factory Settings: On
Press and hold the [Setting] button, then press the [Seat Flip] button to turn on/off
the automatic seat flip function.
It will not open the cover automatically when you are close to it if the automatic seat flip
function is off (it will give a short beep instead).
It will open the cover automatically when you are close to the toilet if the automatic cover
function is on (a long beeping sound will be heard).
Setting The Automatic Drying Function
Factory Settings: On
Press and hold the [Setting] button, then press the [Dry] button to turn on/off the
automatic drying function.
It will not switch to the drying function automatically after washing if the automatic drying
function is off (it will give a short beep instead).
It will switch to the drying function automatically after washing if the automatic drying
function is on (a long beeping sound will be heard).
User Function
Press the [User] button to change to a different user’s personal mode one by one.
The [Gear Position Indicator Light] sows the currently selected user’s settings
(four gear position lights correspond to four users). The selected settings of the User
mode will be used automatically. The functions performed at this time are all according to
the corresponding parameter settings.
In User mode, user’s adjustment about water flow, temperature, and position will be
automatically saved for later memory.
The remote will exit the personal mode after entering into the standby state for some
while.
Setting of Sensing Distance (Cover Flip/Seat Flip)
Summary of Contents for 836092
Page 1: ...INSTRUCTION MANUAL G2ETBCERN 12 WH GANZA II...
Page 7: ...Electronic Bidet Side Buttons...
Page 23: ......