TRONE 836092, Instruction Manual

Page: 11 / 23

the user is seated. The water temperature starts changing from low to high.
The corresponding relationships between the gear position of strong & weak massage
and water pressure are as follows:
Water Pressure: Close, Low Cool & Warm Massage: Low
Water Pressure: Mid Cool & Warm Massage: Mid
Water Pressure: High Cool & Warm Massage: High
Children Wash

Long press the [User] button for more than 2 seconds when the user is seated. The
cleaning wand is extended to the set position and clean according to the set water
temperature. It stops automatically after 90 seconds. This function presets the water
pressure for children washing specially.
Note: Water temperature, water pressure, spray wand position selection, reciprocating,
and massage functions can’t be adjusted when this function starts.
Power Saving/Eco Mode

Press and hold the [Setting] button then press the [Night Light] button to turn
on/off the Power Saving/eco mode. When it turns on, the side knob shown a green light.
When it turns off, the side knob shows a white light. The seat temperature will keep in
range of 77
o
F to 96.8
o
F intelligently according to the change of environment
temperature. If the seat temperature set by the user is lower than the intelligent setting
temperature, it will keep the temperature set by the user. It will keep the temperature set
by the user after exiting the Power Saving/Eco Mode.
Note: Power Saving/Eco Mode means to low down the seat temperature when nobody
uses the toilet.
Night Light

Press the [Night Light] button in the remote to turn this function on/off. When turning
the function on, the
Gear Position button on the remote lights up while the toilet’s soft light
lights up. Press the button once more to turn off the function.
Deodorization

The deodorizing function starts after the user is seated.

The deodorizing function stops after the user leaves the seat for around 60 seconds.

When the user is sitting and the drying or cleaning function is off, short press the [Stop]
button to stop deodorizing.
Cover Flipping Function

When the user is leaving the seat, press the [Cover Flip] button to open or close the
cover. If the seat is open, it will close the seat and the cover together.

It will open the cover automatically when you are close to it if the automatic cover flip
function is set in the single open mode.
Note:The automatic cover flip function is only valid when the cover is closed.
Setting The Automatic Cover Flip