The product must be connected to the cold water supply
• Or it may cause body burn or machine fault
Please confirm if the electrical outlet is connected to the ground.
• Or it may cause electric shock because of fault or short circuit.
The outlet for power wire should obey the following rules or it may cause fire or
electric shock.
Please ask the maintenance team or similar department to replace the
power soft wire if it is broken to avoid danger. Repair work must be done by
professionals.
Please do not throw lighted cigarettes and other flaming material into the toilet.
• Or it may cause fire
Do not install this product in a room where it may be frosted. The room
temperature can’t be less than 39.2 degree Fahrenheit.
Don’t block the air outlet.
CAUTION
Do not use excessive force when closing the cover and the seat.
Do not intentionally soil, spray, or block the cleaning nozzle.
Pull out the plug regularly and clean off the dust with a dry cotton cloth.
Use the new hose parts that come with the product. The old ones should not
be reused.
Keep the product away from the heater.
Close the water supply valve before taking out the junction block.
If you need to be away for a long time, be sure to plug it out, turn off the water,
and drain the remaining water inside the bidet. The remaining water may
freeze when the product is transported over long distances or stored for a long
time in cold winter or alpine region.
Summary of Contents for 836092
Page 1: ...INSTRUCTION MANUAL G2ETBCERN 12 WH GANZA II...
Page 7: ...Electronic Bidet Side Buttons...
Page 23: ......