![background image](http://html.mh-extra.com/html/signature-hardware/burwell-bidet-toilet-seat/burwell-bidet-toilet-seat_installation-instructions_1268965001.webp)
BURWELL BIDET TOILET SEAT INSTALLATION
GETTING STARTED
BEFORE YOU BEGIN
We recommend consulting a professional if you are
unfamiliar with installing plumbing fixtures. Signature
Hardware accepts no liability for any damage to the
product, plumbing, toilet, wall, floor, or for personal
injury during installation.
Observe all local plumbing and building codes.
Unpack and inspect the items for shipping damage. If
any damage is found, contact our Customer Relations
team at 1-866-855-2284.
Ensure that you have gathered all the required
materials that are needed for the installation.
For these instructions, it is assumed that the old
toilet seat has been completely removed and any
necessary repairs or modifications have been
completed.
TOOLS AND MATERIALS:
Plumbers
Tape
Thread
Sealant
1
Burwell Bidet Toilet Seat Installation Instructions
Adjustable
Wrench
Phillips
Screwdriver
IMPORTANT SAFETY NOTES
Do not install into a wet environment, such as a
steam room or wet room.
The seat should be connected to a ground fault
circuit interrupter (GFCI) outlet, 110V-120V,
50/60Hz, 15A.
Do not plug the seat into any type of extension cord,
power strip, or multi-outlet adapter. The plug should
be connected directy to the outlet only.