TrojanTwo User Guide v3.8
Page | 49
System language:
desired language from the list. Press Save button to switch into the selected
language.
Print preview generation method:
When idle (default):
creates one preview thumbnail image from the first image in the actual
print job when print job arrives, then job is printed out. Previews for subsequent labels are
created later in the background when system is in idle state.
Instantly:
creates preview images from all the images in the actual print job on when print job
arrives, then sends job to print when finished with image creation.
Never:
no preview.
The preview is available in the
Job Library
(see section 13.3.3) or in real time in overview menu.
WARNING:
When preview generation is set to ‘Instantly’ it greatly increases the transfer time
of large print jobs due to generating a preview image for every page in real time and can also
cause Data Path Underrun error when large variable data jobs are sent.
Save printed jobs to job library:
Enabled:
The print job is stored and available for reprinting in the job library.
Disabled:
The printed jobs are not stored in the job library, however jobs that already been in
the library will remain and be available for printing.
Auto switch to Overview when printing from job library:
Enabled:
When printing from the job library the screen switches to overview mode.
Disabled:
When printing from the job library the screen remains in job library view.
Barcode scanner support in job library:
enabled/disabled.
When barcode scanner support is enabled, the search filter in Job Library menu (see section
13.3.3) will be active and only accepts input from a connected Barcode scanner (the virtual
keyboard is disabled on screen) when searching for job names.
NOTE:
Rename print jobs to match with barcode input to make this function work.
Use paging in job library:
Enabled:
Enables paging with finger swipe and with scroll bar in Job Library.
Disabled:
Disables swiping and scroll bar in Job Library.
Decimal separator:
User can define separator for displaying decimals in the user interface.
Thousands separator:
User can define separator for displaying thousands in the user interface.
User Management button
By default user management is not enabled, every function of the TrojanTwo press is accessible
without user authentication.
Once User Management is enabled (press save button to enable) authentication is required for
accessing specific functions in TrojanControl. A user with ‘User Management’ rights (like the
built in ‘admin’ user) can create user accounts and can assign rights for each user to access
certain functions in Trojan Control software.
Save
