TrojanTwo User Guide v3.8
Page | 43
Media:
Type:
List of available color profiles
Size:
predefined size from the list or custom size
Media Name:
Save custom size into the profile list
Oversize:
Full bleed printing = oversizing the image by 1mm over the edges when printed.
Aspect ratio is locked
Overspray:
Overspray printed image over the label size by 0.5mm. Does not
preserve aspect ratio.
Color Selection:
Color mode (uses CMYK ink to mix out colors on labels)
Composite Black (uses CMYK to mix out black color on labels)
Black Only (uses only black ink for printing black color on labels)
Print speed
:
6 IPS (resolution 1600 x 1600 dpi)
12 IPS (resolution 1600 x 800 dpi)
Page Management:
Stitching:
Stitching images together make one continuous image. This mode is for
exceeding the maximum printable label length which is 762mm.
TIPS&TRICKS:
The maximum printable label length is 762mm. If 762mm label height
is not enough, then
stitching
is the workaround option. In practice, create a
multipage PDF where the long image is cut into pieces. This way if stitching option
is on, the TrojanTwo press will stick all images from the multipage PDF together and
print it out as one continuous image without gaps between pages.
NOTE:
The
PAUSE
function is not available in stitched mode because pause is only
possible between two printed labels. Stitched images count as one label. The label
counter also counts it as one label.
Buffer:
Buffering the whole print job into the user PC’s memory before sending it to
the TrojanTwo press. This can be useful when the hardware of the user PC (where
the driver is installed) is not powerful enough to generate the print stream in real
time. Especially for large print jobs with variable data.
