10133-12
4. ASSEMBLY STEPS
STEP 7
Rotate Upper Cable (59) as shown.
• Install Pulley 1(50) to unit using one 3/8” x 2”
Hex Bolt (64), two 3/8” Washers (77) and
one 3/8” Locknut (73).
• Install Pulley 2 (50) to unit using one 3/8” x 2-
5/8” Hex Bolt (65), two 3/8” Washers (77),
two Bushings (87) and one 3/8” Locknut
(73).
• Install BIG Pulley 4 (51) to unit using one
3/8” x 2” Hex Bolt (64), two 3/8” Washers
(77) and one 3/8” Locknut (73).
• Attach Nut End of Top Cable to Weight
Selection Rod (30) using Washer (79)
(T3.0 x Ø13 x Ø32) and Washer (81)
(T3.0 x Ø46 x Ø26).
• Install Pulley 3(50) to Double Pulley
Bracket (26) using one 3/8” x 2” Hex Bolt
(64), two 3/8” Washers (77) and one 3/8”
Locknut (73).
• Attach Lat Bar (22) to the ball end of up
per Cable (59) using two Hooks (49) and
one Chain (Long) (53).
STEP 8
Rotate Butterfly Cable (61) as shown.
• Attach Single Pulley Bracket (24) to
Vertical Post (3) using one M8 x 60mm
Hex Bolt (90), two M8 Washers (76) and
one M8 Locknut (91).
• Attach both Ends of Butterfly Cable (61)
to Left & Right Adjustable Plate (15 & 16) using
one 3/8” x 1-3/8” Hex Bolt (63),
two 3/8” Washers (77) and one 3/8” Locknut (73).
• Install Pulley 1(50) to Single Pulley
Bracket (24) using one 3/8” x 2” Hex Bolt
(64), two 3/8” Washers (77) and one 3/8”
Locknut (73).
• Install Pulley 2 (50) to Intersect Pulley
Bracket (25) using one 3/8” x 2” Hex Bolt (64),
two 3/8” Washers (77) and one 3/8” Locknut
(73).
• Install Pulley 3 (50) to Single Pulley Bracket
(24) using one 3/8” x 2” Hex Bolt (64), two 3/8”
Washers (77) and one 3/8” Locknut (73).
