10133-10
4. ASSEMBLY STEPS
STEP 3
• Slide 9 Weight Plates (32) down Guide
Rods (4) as shown.
• Attach the Top Beam (5) to the top of the
Guide Rod (4) using two 3/8” x 1” Hex Bolts
(62) and two 3/8” Washers (77).
• Attach the Top Beam (5) to the top of the
Vertical Post (3) using two 3/8” x 1” Hex
Bolts (62) and two 3/8” Washers (77).
STEP 4
• First cut off and discard the plastic tie that secures
the 3/4”Oil Bushing (83) before proceeding with
assembly.
• Insert Pivot Shaft (54) into the hole of the
Main Base (1) and Bench Press Arm (13)
and secure with two 5/8” Washers (80), two
5/8” Locknuts (75) and two 5/8” Plastic
Dome Caps (42).
• Insert the Left & Right Press Arms (17,18) to
the Bench Press Arm (13) using two PT-1Pop
Pins (48).
