10133-11
4. ASSEMBLY STEPS
STEP 5
• Attach Seat Cushion Support (9) and Connect
Piece (19) to Vertical Post (3) using two 3/8” x
2-7/8” Hex Bolts (66), four 3/8” Washers (77)
and two 3/8” Locknuts (73).
• Attach Seat Cushion Support (9) to Seat
Support Post (10) using one 3/8” x 2-5/8” Hex
Bolt (65), two 3/8” Washers (77) and one 3/8”
Locknut (73).
• Attach Seat Support Post (10) to Main Base
(1) using two 3/8” x 3” Hex Bolts (67), four
3/8” Washers (77) and two 3/8” Locknuts (73).
• Attach Leg Extension (11) to Seat Support
Post (10) using one 1/2” x 3-3/8” Hex Bolt (69),
two 1/2” Washers (78) and one 1/2” Locknut
(74).
• Place two 1/2” Plastic Dome Caps (43) over the
1/2” x 3-3/8” Hex Bolt (69) and 1/2” Locknut
(74).
STEP 6
• Attach the Butterfly Extension (6) and
Connect Piece (19) to Vertical Post (3) using
two 3/8” x 2-7/8” Hex Bolts (66), four 3/8”
Washers (77) and two 3/8” Locknuts (73).
• First cut off and discard the Plastic tie that
secures the 3/4”Oil Bushing(83) before
proceeding with assembly
• Attach Left Butterfly Arm (7) and Left
Adjustable Plate (15) to Butterfly Extension
(6) using one 5/8” Washer (80) and one 5/8”
Locknut (75). Place 5/8” Plastic Dome Cap (42)
over 5/8” Locknut (75).
• Attach Handle Tube (14) to Left Butterfly
Arm (7) using 3/8” x 1”Hex Bolt (62), 3/8”
Washer (77) and Ø36 x Ø11 x T3.0
Washer (82). Place one 3/8” Plastic Dome Cap
(89) over the 3/8” x 1”Hex Bolt (62).
• Repeat the above steps as described to attach
the Right Butterfly Arm (8) and Right Adjustable
Plate (16) to the Butterfly Extension (6).
