WWW.AWC608.COM
R-Bend speed: the speed when turning continuously without
turning up the corner, not too small, generally 800
R-axis start speedy f
generally about 20,000
When the X.Y axis button moves:
1Acceleration of key movement a = cutting deceleration / idling
deceleration (take the minimum value)
When the starting point and the end point are stuck: the value of a
is too large, the take
and the minimum acceleration is too large (under 300),Stuck in the
middle (when the speed is
movement / the maximum acceleration of the axis is too large
2Check the take-off speed of the motion parameters, minimum
acceleration
When the X and Y axes work:
1Stuck start point: check cutting acceleration, minimum
acceleration, take-off speed
2End point stuck: cutting deceleration, minimum acceleration,
take-off speed
UD, R axis keys, when working:
1Check the take-off speed, maximum acceleration of the axis
parameters
2 Motion parameters do not affect UD, R axis
Safe moving speed = safe moving speed / idle speed (take the
minimum value)
1Return to the anchor point after the work is completed
Motion controller user manual
speed: the speed when turning continuously without
up the corner, not too small, generally 800
～
1500
fis generally 300 ~ 400, the Max acceleration is
generally about 20,000
When the X.Y axis button moves:
1Acceleration of key movement a = cutting deceleration / idling
e the minimum value)
When the starting point and the end point are stuck: the value of a
is too large, the take-off speed is too large (the take-off is below 50),
and the minimum acceleration is too large (under 300),Stuck in the
middle (when the speed is the highest): the maximum speed of key
movement / the maximum acceleration of the axis is too large
off speed of the motion parameters, minimum
When the X and Y axes work:
1Stuck start point: check cutting acceleration, minimum
off speed
2End point stuck: cutting deceleration, minimum acceleration,
UD, R axis keys, when working:
off speed, maximum acceleration of the axis
2 Motion parameters do not affect UD, R axis
Safe moving speed = safe moving speed / idle speed (take the
1Return to the anchor point after the work is completed
TC-6832
Motion controller user manual
45
speed: the speed when turning continuously without
1500
acceleration is
1Acceleration of key movement a = cutting deceleration / idling
When the starting point and the end point are stuck: the value of a
off is below 50),
and the minimum acceleration is too large (under 300),Stuck in the
the highest): the maximum speed of key
movement / the maximum acceleration of the axis is too large
off speed of the motion parameters, minimum
1Stuck start point: check cutting acceleration, minimum
2End point stuck: cutting deceleration, minimum acceleration,
off speed, maximum acceleration of the axis
Safe moving speed = safe moving speed / idle speed (take the
1Return to the anchor point after the work is completed
