WWW.AWC608.COM
the normal reset axis cannot be moved by the arrow keys, including
resetting the relevant axis in the return interface.
5) Test the button direction, if there is something wrong, enter the
manufacturer parameters to modify the button d
6: Commissioning the pulse equivalent and the size of the
common axis.
1) X-axis Distance Per Pulse commissioning.
1. Enter the manufacturer parameter X
【
Distance Per Pulse
2. According to the prompt screen, move the axi
convenient position for marking, make this point marked as A, and
click "The first step is set as the starting point"
3. Click "Axis Move" to move the axis to a certain position, mark
this point as B, and click "Second Set as End Point" on t
4.first measure the actual distance between the AB points with a
ruler, and then click "0.00" in the "distance after the third step
measurement"; enter the distance to be measured
5. Click "Step 4: Modify Distance Per Pulse " and click "Modify" t
complete the commissioning of the X
value.
2) Similarly, the Distance Per Pulse values of Y axis, UD axis and
U axis are the same as X axis
3) Set the X Y and Z UD1 axis size
1: return to the standby screen, press the reset butto
Motion controller user manual
the normal reset axis cannot be moved by the arrow keys, including
resetting the relevant axis in the return interface.
5) Test the button direction, if there is something wrong, enter the
manufacturer parameters to modify the button direction,
: Commissioning the pulse equivalent and the size of the
axis Distance Per Pulse commissioning.
1. Enter the manufacturer parameter X-axis screen and click "
Distance Per Pulse
】
"
2. According to the prompt screen, move the axis to a certain
convenient position for marking, make this point marked as A, and
click "The first step is set as the starting point"
3. Click "Axis Move" to move the axis to a certain position, mark
this point as B, and click "Second Set as End Point" on t
4.first measure the actual distance between the AB points with a
ruler, and then click "0.00" in the "distance after the third step
measurement"; enter the distance to be measured
5. Click "Step 4: Modify Distance Per Pulse " and click "Modify" t
complete the commissioning of the X-axis Distance Per Pulse
2) Similarly, the Distance Per Pulse values of Y axis, UD axis and
U axis are the same as X axis
3) Set the X Y and Z UD1 axis size
1: return to the standby screen, press the reset butto
TC-6832
Motion controller user manual
28
the normal reset axis cannot be moved by the arrow keys, including
5) Test the button direction, if there is something wrong, enter the
irection,
: Commissioning the pulse equivalent and the size of the
axis screen and click "
s to a certain
convenient position for marking, make this point marked as A, and
3. Click "Axis Move" to move the axis to a certain position, mark
this point as B, and click "Second Set as End Point" on the screen
4.first measure the actual distance between the AB points with a
ruler, and then click "0.00" in the "distance after the third step
5. Click "Step 4: Modify Distance Per Pulse " and click "Modify" to
axis Distance Per Pulse
2) Similarly, the Distance Per Pulse values of Y axis, UD axis and
1: return to the standby screen, press the reset button first, and
