WWW.AWC608.COM
5
1
R1-
The origin limit of the R1 axis. When the R1 axis
moves to the minimum coordinate position (zero
position), the limit sensor inputs signal.
2
R2-
The origin limit of the R2 axis. When
moves to the minimum coordinate position (zero
position), the limit sensor inputs signal.
3
N1
The origin limit of the N1 axis. When the N1 axis
moves to the minimum coordinate position (zero
position), the limit sensor inputs signal.
4
N2
The origin limit of the N2 axis. When the N2 axis
moves to the minimum coordinate position (zero
position), the limit sensor inputs signal.
5
GND Power ground.
Note:
All input ports: Voltage 24v or 0v, need to open the function in the
panel, high and low level can be optional.
Manufacturers recommend:axis origin, hardware limit switch: it is
recommended to choose NPN type, often open.Common sensors:
black line connect signal feet, blue line connect GND, brown line
connect 24v.
All input ports can be c
1.5.2.4 signal output end
Output voltage: 24v, effective at high voltage.Each outlet must be
connected to rated dc voltage 24V or more relay to use, not directly
connected to the load!
All outlets can output test inter
Motion controller user manual
The origin limit of the R1 axis. When the R1 axis
moves to the minimum coordinate position (zero
position), the limit sensor inputs signal.
The origin limit of the R2 axis. When
moves to the minimum coordinate position (zero
position), the limit sensor inputs signal.
The origin limit of the N1 axis. When the N1 axis
moves to the minimum coordinate position (zero
position), the limit sensor inputs signal.
The origin limit of the N2 axis. When the N2 axis
moves to the minimum coordinate position (zero
position), the limit sensor inputs signal.
Power ground.
All input ports: Voltage 24v or 0v, need to open the function in the
low level can be optional.
Manufacturers recommend:axis origin, hardware limit switch: it is
recommended to choose NPN type, often open.Common sensors:
black line connect signal feet, blue line connect GND, brown line
All input ports can be checked in the panel's test interface.
1.5.2.4 signal output end
Output voltage: 24v, effective at high voltage.Each outlet must be
connected to rated dc voltage 24V or more relay to use, not directly
connected to the load!
All outlets can output test interface to test, respectively: one key to
TC-6832
Motion controller user manual
14
The origin limit of the R1 axis. When the R1 axis
moves to the minimum coordinate position (zero
position), the limit sensor inputs signal.
The origin limit of the R2 axis. When the R2 axis
moves to the minimum coordinate position (zero
position), the limit sensor inputs signal.
The origin limit of the N1 axis. When the N1 axis
moves to the minimum coordinate position (zero
position), the limit sensor inputs signal.
The origin limit of the N2 axis. When the N2 axis
moves to the minimum coordinate position (zero
position), the limit sensor inputs signal.
All input ports: Voltage 24v or 0v, need to open the function in the
Manufacturers recommend:axis origin, hardware limit switch: it is
recommended to choose NPN type, often open.Common sensors:
black line connect signal feet, blue line connect GND, brown line
hecked in the panel's test interface.
Output voltage: 24v, effective at high voltage.Each outlet must be
connected to rated dc voltage 24V or more relay to use, not directly
face to test, respectively: one key to
