FID / Document identification
CTD / Type
VS / Release
1000513 108
F
8 / 24
CONFIDENTIEL TRIXELL
Copyright © 2000-2003-2005 TRIXELL. Tous droits réservés. Ce document et l’information qu’il contient sont la propriété exclusive de
TRIXELL. Ils ne peuvent être reproduits ou divulgués sous quelque forme que ce soit sans l’accord préalable écrit de TRIXELL.
TRIXELL PROPRIETARY INFORMATION
Copyright © 2000-2003-2005 by TRIXELL. All rights reserved. This document and the information contained therein are TRIXELL’s
exclusive property. Any copy and/or disclosure thereof in any form whatsoever are subject to TRIXELL’s prior written consent.
Connector pinout (see label on detector for pin locations):
PIN NUMBER
(9-pin connector)
FUNCTION
(3 power supplies with mains synchronization)
1
- 5 V Return (GND)
2
+ 5 V Return (GND)
3
+ 24 V Return (GND)
4
Mains synchronization signal
5
Mains synchronization signal return and shield (GND)
6
- 5 V
7
+ 5 V
8
+ 24 V
9
+ 24 V
Housing Shield
(GND)
2.2.2 Remote control and X-ray enable output connector
•
Bi-directional RS-232C serial link for remote control of the detector with no hardware
handshake and transfer rate set to 9600 bds / even parity / 1 bit stop. This link should be
externally opto-isolated to prevent ground loops in the detector connections.
•
Current loop (20mA) interface which can be used to enable the X-ray generator through an
optocoupler device.
•
Connector type (detector side) : 6-pin mini-DIN female
•
Connector pinout (receptacle) :
pin #1: TX Output
pin #2 : XRAY-
pin #3 : GND
pin #4 : +5V Output
pin #5 : RX Input
pin #6 : XRAY-ENABLE -
Connector metal housing : shield (GND)
The pin #4 (l5V) is a power supply output, available for external uses. The maximum
current available on this +5V pin is 100mA (@ 4.75V).
