101
Maintenance and Adjustment
Tyre Wear
As the tyre tread wears down, the tyre
becomes more susceptible to punctures. It is
estimated that 90% of all tyre problems occur
during the last 10% of tread life (90% worn).
It is therefore not recommended to use tyres
until they are worn to their minimum.
Minimum Recommended Tread
Depth
In accordance with the periodic maintenance
chart, measure the depth of the tread with a
depth gauge, and replace any tyre that has
worn to, or beyond, the minimum allowable
tread depth specified in the table below:
Warning
Tyre pressures which have been reduced
for off-road riding will impair on-road
stability. Always ensure the tyre pressure
are set as described in the Specification
section for on-road use.
Operation of the motorcycle with incorrect
tyre pressures may cause loss of
motorcycle control leading to an accident.
Under 130 km/h
(80 mph)
2 mm (0.08 in)
Over 130 km/h
(80 mph)
Rear 3 mm (0.12 in)
Front 2 mm (0.08 in)
cboa
Warning
This motorcycle must not be operated
above the legal road speed limit except in
authorised closed-course conditions.
Warning
Only operate this Triumph motorcycle at
high speed in closed-course on-road
competition or on closed-course racetracks.
High-speed operation should only then be
attempted by riders who have been
instructed in the techniques necessary for
high-speed riding and are familiar with the
motorcycle's characteristics in all
conditions. High-speed operation in any
other circumstances is dangerous and will
lead to loss of motorcycle control and an
accident.
Summary of Contents for Tiger 800
