35
General Information
Note:
•
If the malfunction indicator light
flashes when the ignition is switched
on, contact an authorised Triumph
dealer as soon as possible to have
the situation rectified. In these
circumstances the engine will not
start.
Alarm/Immobiliser Indicator Light
This Triumph model is fitted
with an engine immobiliser
which is activated when the
ignition switch is turned to the
OFF position. If the motorcycle is fitted with a
genuine Triumph accessory alarm, the
immobiliser will operate as normal but the
alarm/immobiliser light will operate as
described below.
With Alarm Fitted
The alarm/immobiliser light will only
illuminate when the conditions described in
the genuine triumph accessory alarm
instructions are met.
Without Alarm Fitted
When the ignition switch turned to the
OFF position, the alarm/immobiliser light will
flash on and off for 24 hours to show that the
engine immobiliser is on. When the ignition
switch is turned to the ON position the
immobiliser and the indicator light will be off.
If the indicator light remains on it indicates
that the immobiliser has a malfunction that
requires investigation. Contact an authorised
Triumph dealer as soon as possible to have
the fault checked and rectified.
ABS (Anti-Lock Brake System) Indicator
light (Only on models fitted with ABS)
When the ignition switch is turned
to the ON position, it is normal
that the ABS warning light will
flash on and off. The light will
continue to flash after engine start-up until
the motorcycle first reaches a speed
exceeding 6 mph (10 km/h) when it will go
off.
Unless the ABS system is disabled (see
page
29
), or there is a fault, it should not
illuminate again until the engine is restarted.
If the indicator light becomes illuminated at
any other time while riding it indicates that
the ABS has a malfunction that requires
investigation.
See also Braking on page
59
.
Warning
If the ABS is not functioning, the brake
system will continue to function as a non
ABS braking system. Do not continue to
ride for longer than is necessary with the
indicator light illuminated. Contact an
authorised Triumph dealer as soon as
possible to have the fault checked and
rectified. In this situation braking too hard
will cause the wheels to lock resulting in
loss of control and an accident.
Summary of Contents for Tiger 800
