Triumph Tiger 800, Owner'S Handbook Manual

Page: 116 / 136

116
Maintenance and Adjustment
Where to be Careful
Avoid spraying water with any great force
near the following places:
• Instruments
• Brake cylinders and brake calipers
• Under the fuel tank
• Headstock bearings
• Air intake duct under the rider’s seat.
Note:
• Use of soaps that are highly alkaline
will leave a residue on painted
surfaces, and may also cause water
spotting. Always use a low alkaline
soap to aid the cleaning process.
After Washing
Remove the plastic bags and tape, and clear
the air intakes.
Lubricate the pivots, bolts and nuts.
Test the brakes before motorcycle operation.
Start the engine and run it for 5 minutes.
Ensure adequate ventilation for the exhaust
fumes.
Use a dry cloth to absorb water residue. Do
not allow water to stand on the machine as
this will lead to corrosion.
Seat Care
To help maintain its appearance, clean the
seat using a sponge or cleaning cloth with
soap and water.
Caution
Any water sprayed around the air intake
duct could enter the airbox and engine,
causing damage to both items.
Caution
Use of high-pressure spray washers is not
recommended. When using pressure
washers, water may be forced into
bearings and other components causing
premature wear from corrosion and loss of
lubrication.
Warning
Never wax or lubricate the brake discs.
Loss of braking power and an accident
could result. Clean the disc with a
proprietary brand of oil-free brake disc
cleaner.
Caution
Use of chemicals or high-pressure spray
washers is not recommended for cleaning
the seat. Using chemicals or pressure
washers may damage the seat cover.