Triumph Speed Triple 1200 RR 2021, Owner'S Handbook Manual

Page: 73 / 212

GENERAL INFORMATION
73
▼ Once these conditions have been
met, press the SET/- button to
activate cruise control. The cruise
control symbol will be shown in a
green light in the TFT display to
indicate that cruise control is now
active.
The word SET will be shown next to the
cruise control symbol. The cruise control
set speed will be shown and the cruise
control light will illuminate in the
tachometer
indicating that cruise
control is active.
SET
50
AM
15
c
o
12:34
50
0
F
E
5
MPH
RPM X 1000
2
4
3
5
6
7
8
9
10
1
2
4
3
5
6
7
8
9
10
1
1 2 3
1. Cruise control symbol
2. Cruise control set indicator
3. Cruise control set speed
The cruise control system will maintain
the set speed until:
▼ The set speed is adjusted as
described on page
73.
▼ Cruise control is deactivated as
described on page
74.
Adjusting the Set Speed While in
Cruise Control
To adjust the set speed while in cruise
control, press and release the:
▼ RES/+ button to increase the speed
▼ SET/- button to decrease the speed.
Each press of the buttons will adjust
the speed by 1 mph or 1 km/h. If the
buttons
are held, the speed
continuously increases or decreases in
single digit increments.
Stop pressing the adjust button when
the desired speed is shown in the
display.
Note
The cruise control set speed display will
flash until the new set speed has been
achieved.
If riding up a steep incline and cruise
control is unable to maintain the set
speed, the cruise control set speed
display will flash until the motorcycle
has regained the set speed.
An alternative way to increase the
speed in cruise control is to accelerate
to the desired speed using the throttle
grip and then press the SET/- button.