ACCESSORIES, LOADING AND PASSENGERS
106
Warning
Fit only genuine Triumph accessories
to the correct Triumph motorcycle
model.
Always check the Triumph Fitting
Instruction
associated
with
the
genuine Triumph accessory. Make sure
the Triumph motorcycle model that
the Triumph accessory is to be fitted
to, is listed as approved for the
genuine Triumph accessory. For all
Triumph
Fitting
Instructions,
see
www.triumphinstructions.com.
Never fit genuine Triumph accessories
to a Triumph motorcycle model that is
not listed in the associated Triumph
Fitting Instruction, as this may affect
handling, stability or other aspects of
the motorcycle operation that may
result in an accident causing severe
injuries or death.
Warning
Never ride an accessory equipped
motorcycle, or a motorcycle carrying a
payload of any kind, at speeds above
80 mph (130 km/h). In either/both of
these conditions, speeds in excess of
80 mph (130 km/h) should not be
attempted even where the legal speed
limit permits this.
The presence of accessories and/or
payload will cause changes in the
stability
and
handling
of
the
motorcycle.
Failure to allow for changes in
motorcycle stability may lead to loss of
motorcycle control and an accident.
When riding at high speed, always be
aware
that
various
motorcycle
configuration
and
environmental
factors can adversely affect the
stability of your motorcycle. For
example:
- Incorrectly balanced loads on both
sides of the motorcycle
- Incorrectly adjusted front and rear
suspension settings
- Incorrectly adjusted tyre pressures
- Excessively or unevenly worn tyres
- Side winds and turbulence from
other vehicles
- Loose clothing.
Remember that the 80 mph (130 km/h)
absolute limit will be reduced by the
fitting of non-approved accessories,
incorrect loading, worn tyres, overall
motorcycle condition and poor road or
weather conditions.
Summary of Contents for Speed Triple 1200 RR 2021
