Triumph Speed Triple 1200 RR 2021, Owner'S Handbook Manual

Page: 134 / 212

MAINTENANCE
134
▼ Hold the assembly together and
position the reservoir cap, diaphragm
seal and reservoir cap retaining
screws onto the reservoir.
1
2
1. Reservoir cap, diaphragm seal and
reservoir cap retaining screws assembly
2. Reservoir
▼ Tighten the reservoir cap retaining
screws to 1
Nm.
Warning
If the reservoir cap retaining screws
are over tightened this can result in a
brake fluid leak.
A dangerous riding condition leading
to loss of motorcycle control and an
accident could result if this warning is
ignored.
Rear Brake Fluid Level Inspection
and Adjustment
Warning
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir, consult your authorised
Triumph dealer for advice before
riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and
will cause reduced brake
performance potentially leading to loss
of motorcycle control and an accident.
The reservoir is visible from the right
hand side of the motorcycle, forward of
the silencer, below the rider’s seat.
1
2
1. UPPER level line
2. LOWER level line
To inspect the rear brake fluid level:
▼ Check the level of brake fluid visible
in the reservoir.
▼ The brake fluid level must be kept
between the upper and lower level
lines (reservoir held horizontal).