CLEANING AND STORAGE
184
Preparation after Storage
To prepare the motorcycle to be ridden
after storage, do the following:
▼
Install the battery (if removed) (see
page
▼
If the motorcycle has been stored for
more than four months, change the
engine oil (see page
▼
Check all the points listed in the Daily
Safety Checks section.
▼
Before starting the engine, remove
the spark plugs from each cylinder.
▼
Put the side stand down.
▼
Crank the engine on the starter
motor several times.
▼
Refit the spark plugs, tightening to 12
Nm, and start the engine.
▼
Check and if necessary correct the
tyre pressures (see the relevant
Specification section).
▼
Clean the entire vehicle thoroughly.
▼
Check
the
brakes
for
correct
operation.
▼
Test ride the motorcycle at low
speeds.
Summary of Contents for Speed Triple 1200 RR 2021
