Triumph Speed Triple 1200 RR 2021, Owner'S Handbook Manual

Page: 32 / 212

GENERAL INFORMATION
32
If traction control is switched off:
▼
The TC indicator light will not
illuminate. Instead the TC disabled
warning light will be illuminated.
Note
Traction control will not function if there
is a malfunction with the ABS. The
warning lights for the ABS, traction
control and the MIL will be illuminated.
Traction Control (TC) Disabled
Warning Light
The TC disabled warning light
should not illuminate unless traction
control is switched off or there is a
malfunction.
If the warning light becomes illuminated
while riding, it indicates that the
traction
control system has a
malfunction that requires investigation.
Direction Indicators
When the direction indicator
switch is turned to the left or right, the
direction indicator warning light will
flash on and off at the same speed as
the direction indicators.
Hazard Warning Lights
To turn the hazard warning lights on or
off, press and release the hazard
warning light switch.
The ignition must be switched ON for
the hazard warning lights to function.
The hazard warning lights will remain on
if the ignition is switched OFF, until the
hazard warning light switch is pressed
again.
High Beam Light
When the high beam button is
pressed the high beam will be switched
on. Each press of the button will swap
between dip and high beam.
If daytime running lights are fitted to
the motorcycle, the high beam button
has additional functionality.
If the DRL switch is in the daytime
running lights position, then press and
hold the high beam button to turn the
high beam on. It will remain on as long
as the button is held in and will turn off
as soon as the button is released.
A lighting on/off switch is not fitted to
this model. The rear light and licence
plate light all function automatically
when the ignition is on.
The headlight will function when the
ignition is on. The headlight will go off
while pressing the starter button until
the engine starts.