Triumph Adler P-4035i User Manual Download Page 180

Page: 180 / 204

9-5

Troubleshooting > Error Code List

Error Code List

When a transmission error occurs, one of the following error codes is recorded in the TX/RX Result Report and Activity
Report.

NOTE

“U” or “E” will appear in the error code depending on the communication speed setting.

Error Code

Possible Cause/Action

Busy

Failed to establish connection with the recipient despite auto redialing the preset number of times.
Send again.

CANCELED

Transmission was canceled due to an action to cancel transmission.
Reception was canceled due to an action to cancel reception.

U00300

Paper depletion occurred at the recipient machine. Check with the recipient.

U00430 - U00462

Reception was canceled because of mismatching of communication features with the sender machine
although the line connection was established.

U00601 - U00690

Communication was stopped due to the machine failure. Send or receive again.

U00700

Communication was stopped due to failure on the part of the sender or recipient machine.

U00800 - U00811

Page(s) not sent correctly. Send again.
If you still have trouble, reduce TX Start Speed and send again.

NOTE

If the communication error occurs frequently, change the default setting of TX Start Speed in
System Menu.

U00900 - U00910

Page(s) not received correctly. Ask the sender to resend.

NOTE

If the communication error occurs frequently, change the default setting of RX Start Speed in
System Menu.

U01000 - U01097

Communication error occurred during transmission. Send again.
If you still have trouble, reduce TX Start Speed and send again.

NOTE

If the communication error occurs frequently, change the default setting of TX Start Speed in
System Menu.

U01100 - U01196

Communication error occurred during reception. Ask the sender to resend.

NOTE

If the communication error occurs frequently, change the default setting of RX Start Speed in
System Menu.

U01400

Failed to establish communication with the sender or recipient machine because dialing registered for
a push line system was used in a pulse line system.

U01500

Communication error occurred during high-speed transmission. Send again.
If you still have trouble, reduce TX Start Speed and send again.

NOTE

If the communication error occurs frequently, change the default setting of TX Start Speed in
System Menu.

Summary of Contents for P-4035i













































































































































































































Search results

Summary of Contents for P-4035i

Reviews:

Related manuals for P-4035i

Brands by name

Popular brands

Triumph Adler P-4035i, User Manual

Search results

Summary of Contents for P-4035i

Reviews:

Related manuals for P-4035i

Brands by name

Popular brands