Triumph Adler LP 4235, Instruction Handbook Manual

Page: 161 / 211

7-64 Using the Operation Panel
Security
The security functions can be set up to protect printer operation and the
print data.
The options available in Security are as follows:
• ID (Administrator ID input)
• Password (Administrator password input)
• I/F Block (Interface (external device) block setting)
• NetWare (NetWare setting)
• AppleTalk (AppleTalk setting)
• IPP (IPP setting)
• SSL Server (SSL Server setting)
• IPSec (IPSec setting)
•
Security Level (Security level setting)
1
Press [MENU] .
2
Press
U
or
V
repeatedly until
Security >
appears.
ID (Administrator ID input)
To use the Security function, you must enter an administrator ID. For
information on how to set the administrator ID, refer to
Admin
(Administrator settings)
on page
7-78
.
1
Press
Z
while
Security >
is displayed.
2
The message display shows
ID
and a blinking cursor (
_
).
3
Press
U
or
V
to increase or decrease, respectively, the value at the
blinking cursor. Enter the specified ID. Use
Y
and
Z
to move the
cursor right and left. Enter an ID consisting of between 1 and 16
numbers.
4
Press [OK] . Proceed to the next step
Password (Administrator
Password input)
.
Security >
ID
_