Triumph Adler LP 4235, Instruction Handbook Manual

Page: 160 / 211

Using the Operation Panel 7-63
6
Press [MENU] . The display returns to
Ready
.
Auto Panel Reset (Auto panel reset settings)
The Auto Panel Reset function automatically restores the default
settings if the panel is not used for a set time. The default setting is
On
.
For setting the time until the panel is reset, refer to the next section
Panel Reset Timer (Setting the panel reset timer)
.
1
Press
Z
while
>Timer >
is displayed.
2
Press
U
or
V
repeatedly until
>>Auto Panel Reset
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Select
On
or
Off
using
U
or
V
.
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Panel Reset Timer (Setting the panel reset timer)
When Auto Panel Reset is set to
On
, this sets the time until the panel is
automatically reset after the user stops using the panel. The default time
is
90
seconds.
1
Press
Z
while
>Timer >
is displayed.
2
Press
U
or
V
repeatedly until
>>Panel Reset Timer
appears.
3
Press [OK] . The message display shows a blinking cursor (
_
).
4
Press
U
or
V
to increase or decrease the value at the blinking
cursor and set the desired time. The time must be set between
005
and
495
seconds, in 5-second increments. Use
Y
and
Z
to move
the cursor right and left.
5
Press [OK] .
6
Press [MENU] . The display returns to
Ready
.
Auto Sleep (Setting the sleep timer)
The printer has a sleep timer that is used to conserve power when the
printer is not printing, processing, or receiving data. The default setting is
On
.
1
Press
Z
while
>Timer >
is displayed.
2
Press
U
or
V
repeatedly until
>>Auto Sleep
appears.
3
To turn off the sleep timer, press [OK] . A blinking question mark (
?
)
appears.
4
Select
On
or
Off
using
U
or
V
.
5
Press [OK] . The sleep timer is turned off.
6
Press [MENU] . The display returns to
Ready
.
>>Auto Panel
Reset ? On
>>Panel Reset
Timer 090sec.
>>Auto Sleep
? On