Triumph Adler LP 4235, Instruction Handbook Manual

Page: 129 / 211

7-32 Using the Operation Panel
Type Adjust (Creating custom paper type)
The following describes the procedure used to set a user-defined paper
type for the printer. Eight custom user settings may be registered. After
having been set, any of these may be called up when setting the paper
type for a paper source.
The paper weight and duplex path can be set (refer to
Paper Weight
(Setting the paper weight)
on page
7-32
, and
Duplex Path (Setting the
duplex path)
on page
7-33
) after selecting the paper type to be
customized as follows. For how to reset the customized settings, refer to
Reset Type Adjust (Resetting the custom paper type)
on page
7-33
.
1
Press
Z
while
Paper Settings >
is displayed.
2
Press
U
or
V
repeatedly until
>Type Adjust >
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
4
Press
U
or
V
to display the desired paper type. The display
changes as shown below.
PLAIN
TRANSPARENCY
PREPRINTED
LABELS
BOND
RECYCLED
VELLUM
ROUGH
LETTERHEAD
COLOR
PREPUNCHED
ENVELOPE
CARDSTOCK
THICK
HIGH QUALITY
CUSTOM 1 (to 8)
5
Press [OK] .
6
Press
Z
and proceed to the next step
Paper Weight (Setting the
paper weight)
.
Paper Weight (Setting the paper weight)
You can set the paper thickness for your custom paper type to be
customized. The default setting is
Normal 2
.
1
Display the custom paper type (refer to
Type Adjust (Creating
custom paper type)
on page
7-32
) and press
Z
.
2
Press
U
or
V
repeatedly until
>>Paper Weight
appears.
3
Press [OK] . A blinking question mark (
?
) appears.
>Type Adjust >
?PLAIN
>>Paper Weight
? Normal 2