Triumph Adler LP 4230, Instruction Handbook Manual

Page: 120 / 189

Using the Operation Panel 7-23
Unit (Selecting the unit of measurement)
1
Press
Z
.
2
Press
U
or
V
repeatedly until
>>Unit
appears. The unit of
measurement can be selected between millimeters and inches. The
current unit of measurement is displayed (the default setting is
mm
).
3
Press
[OK]
. A blinking question mark (
?
) appears.
4
Select
mm
or
inch
using
U
or
V
.
5
Press
[OK]
.
Set the dimensions of the paper as described in the next section.
Entering the Width and Length
Enter the paper size for
X Dimension
and
Y Dimension
as shown in
the figure.
1
When the unit of measurement is set, press
V
.
>>X Dimension
appears (the paper width setting).
2
Press
[OK]
. A blinking cursor (
_
) appears.
3
Press
U
or
V
to increase or decrease the value of the figure where
the cursor is blinking and display the desired width.
Acceptable paper widths are as follows:
•
Cassette: 105 to 216 mm (4.13 to 8.5 inches)
•
Paper Feeder PF-100 (optional): 148 to 216 mm (5.83 to 8.5
inches)
4
Display the paper width and press
[OK]
.
5
When the width is set, press
V
.
>>Y Dimension
appears (the
paper length setting). Set the desired length in the same way as the
width.
Acceptable paper lengths are as follows:
•
Cassette: 148 to 356 mm (5.83 to 14.02 inches)
•
Paper Feeder PF-100 (optional): 210 to 356 mm (8.5 to 14.02
inches)
6
Display the paper length, press
[OK]
.
7
Press
[MENU]
. The display returns to
Ready
.
>>Unit
? mm
X Dimension
Y Dimension
105 to 216mm
(4-1/8 to 8-1/2 inches)
148 to 356mm (5-1
3/16 to 14 inches)
>>X Dimension
216 mm