Triumph Adler DCC 6520, Instruction Manual

Page: 326 / 373

10-15
Troubleshooting > Responding to Error Messages
E
F
H
I
Error Message Checkpoints Corrective Actions Reference
Page
Error occurred at cassette #.
— Remove the indicated cassette. Press
[Next >] to follow the instructions. —
Error Message Checkpoints Corrective Actions Reference
Page
Failed to specify Job
Accounting.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
— Failed to specify Job Accounting when
processing the job externally. The job is
canceled. Press [End]. —
Failed to store job retention data.
— The job is canceled. Press [End]. —
Finisher failure.
— Contact your Service Representative.
Press the
System Menu/Counter
key,
[Adjustment/Maintenance], [Service
Setting] and then [Reset Disable
Function Mode]. Press [Execute] to
perform Reset Disable Function Mode.
—
Finisher tray is full of paper.
Is the acceptable storage
capacity exceeded for the
document finisher tray? Remove paper from the document
finisher tray. —
Fuser unit is not installed.
— Replace the fuser unit (h-1) to our
specified fuser unit. See the leaflet
supplied with the fuser unit for details. —
Error Message Checkpoints Corrective Actions Reference
Page
High temperature. Adjust room
temp.
— Adjust the temperature and the humidity
of your room.
1-3
Error Message Checkpoints Corrective Actions Reference
Page
Incorrect account ID.*
— The account ID was incorrect when
processing the job externally. The job is
canceled. Press [End]. —
Incorrect Login User Name or
Password.*
— The login user name or password was
incorrect when processing the job
externally. The job is canceled. Press
[End]. —