Triumph Adler DCC 2725, Instruction Handbook Manual

Page: 317 / 468

Default Setting (System Menu)
OPERATION GUIDE 8-63
8
Normal adjustment
Use the procedure below for normal adjustment.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [ ] and
then [Next] of Gray Adjustment .
3
Press [Execute]. A color pattern is printed. Check
that the number "1" is printed at the bottom of the
color pattern.
4
As shown in the illustration, place the printed side
down on the platen with the three black boxes
aligned to the top.
5
Press the Start key. The color pattern is read and
adjustment begins.
6
The second color pattern is output. Check that the
number "2" is printed at the bottom of the color
pattern and then repeat steps 4 and 5.
IMPORTANT: Always check the number printed at the
bottom of the color pattern before placing it on the
platen. Do not mistake the first and second color
patterns.
7
Press [OK] in the adjustment end confirmation
screen.
Detailed Adjustment
A total of 4 color pattern pages (No. 1 to 4) are printed during detailed adjustment. As with normal adjustment
(page 8-63) , the printed color patterns are read sequentially during detailed adjustment.
IMPORTANT: The numbers 1 to 4 are printed at the bottom of each of the printed color pattern. Always check
the printed number before placing each color pattern on the platen.
Use the procedure below to carry out detailed adjustment.
1
Refer to steps 1 to 2 in normal adjustment to
display the
Gray Adjustment screen.
2
Press [Detail].