Triumph Adler DCC 2725, Instruction Handbook Manual

Page: 171 / 468

Copying Functions
OPERATION GUIDE 4-49
4
Priority Override
Suspends a current job and gives the selected job priority for copying. The suspended job resumes after Priority
Override copying is finished.
NOTE:
The current job that is selected as Priority Override cannot be suspended.
The procedure for using Priority Override is explained below.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Advanced Setup] and then [Priority
Override].
4
Press [On] to select Priority Override.
5
Press [OK].
6
Press the Start key. The current copy job is
suspended and the copy job selected in Priority
Override starts. The suspended job resumes after
Priority Override copying is finished.