Triumph Adler DCC 2725, Instruction Handbook Manual

Page: 191 / 468

Sending Functions
OPERATION GUIDE 5-11
5
1-sided/2-sided Selection
Select the type and binding of original depending on the original.
The table below lists the binding directions for each original type.
Use the procedure below to select the original type and binding direction when sending scanned originals.
1
Press the Send key.
2
Place the originals on the platen.
3
Press [Original/Sending Data Format] and then [2-
sided/Book Original].
4
Press [1-sided], [2-sided], or [Book].
5
If you selected [2-sided] or [Book], you should also
select the binding direction and press [Original
Orientation] to select the direction in which the
original is set on the platen.
6
Press [OK].
7
Specify the destination, and press the Start key to
start sending.
Original Type Binding
1-sided Sheet Original 1-sided —
2-sided Sheet Original 2-sided*
* Only when the optional document processor is used.
Binding Left/Right,
Binding Top
Open Book Original such
as magazine and book Book Binding Left,
Binding Right
Right Left
Top Edge Top
Original
Orientation
2-sided/Book Original
Book
2-sided
1-sided
Status 10/10/2008 10:10
Cancel OK Add Shortcut
Preview
Original
Zoom
Paper 100%
---
:
:
:
---
Ready to send.
Destination
Place original.
Place original.