Triumph Adler DCC 2725, Instruction Handbook Manual

Page: 282 / 468

Default Setting (System Menu)
8-28 OPERATION GUIDE
Collate/Offset
Set the defaults for Collate/Offset. The table below shows the available settings.
NOTE:
Refer to page 3-19 for Collate/Offset.
Use the procedure below to set the default Collate/Offset settings.
1
Press the System Menu key.
2
Press [Common Settings], [ ], [Next] of Function
Defaults , [ ] and then [Change] of Collate/Offset .
3
Select the defaults for Collate and Offset
respectively.
4
Press [OK].
Auto Image Rotation
Select the default Auto Image Rotation setting. The table below shows the available settings.
NOTE:
Refer to page 4-43 for Auto Image Rotation .
Use the procedure below to set the default Auto Image Rotation settings.
1
Press the System Menu key.
2
Press [Common Settings], [ ], [Next] of Function
Defaults , [ ] and then [Change] of Auto Image
Rotation .
3
Select the default for [Off] or [On].
4
Press [OK].
Item Description
Collate Off Collate not performed.
On Collate performed.
Offset Off Offset not performed.
Each Set
(Each Page) Offset performed. (If [Off]) is selected of
Collate, it is performed [Each Page].)
Item Description
Off No Auto Image Rotation performed.
On Auto Image Rotation performed.