Triumph Adler DCC 2725, Instruction Handbook Manual

Page: 135 / 468

Copying Functions
OPERATION GUIDE 4-13
4
Output Destination
You can use the procedure below to select an output destination such as the optional document finisher for your
copies.
NOTE:
Optional output destinations include the job separator, document finisher, 3,000 sheet document
finisher and mailbox.
The table below shows the available output destinations.
NOTE:
To change default destination for copies, refer to Paper Output on page 8-18 for details.
Use the procedure below to select the output destination.
1
Press the Copy key.
2
Place the originals on the platen.
3
Press [Org./Paper/Finishing] and then [Paper
Output].
4
Select the output destination for finished copies.
When you select [Finisher Tray], [TrayB], [TrayC] or
[Tray1] to [Tray7], select the orientation of output
copy,
Face Up (print facing up) or Face Down (print
facing down).
5
Press [OK].
6
Press the Start key to start copying.
Destination Description
Top tray Top tray of the machine (where copies are stored)
Finisher Tray*
* Copy output orientation can be selected either as face-up (print facing up)
or face-down (print facing down).
Tray of the optional document finisher
TrayA,TrayB*,TrayC* Trays A to C in the optional 3,000 sheet document
finisher
Job Separator Tray Optional job separator
Tray1 to 7* Trays 1 to 7 in the optional mailbox (tray 1 is the top
tray)
Paper Output
Face Up
Face Down
Status 10/10/2008 10:10
Ready to copy.
Copies
Cancel OK Add Shortcut
Tray A
Top Tray Tray C Tray B
Tray 1 Job Separator
Tray Tray 3 Tray 2
Tray 5
Tray 4 Tray 7 Tray 6
Preview
Original
Zoom
Paper
100%
---
:
:
: ---
Place original.