7. Press the Zoom(+) or Zoom(-) key to specify the ratio of the length. The numeric
keys can also be used to enter the zoom ratio.
8. Press the enter key.
9. Make sure that "ENTER" has been selected and press the enter key.
The message display will return to the "READY TO COPY." screen.
(2) Interrupt copying
Interrupt copying is useful if, during one copy job, other originals need to be copied
at the different settings. Interrupted copy job can be resumed at the same settings
as before after the rush job is finished.
* Interrupt copying cannot be used if the transparency mode, the transp
backing sheet mode or the hand-out mode has been selected.
1. Press the Interrupt key. The Interrupt indicator will blink. Wait a while until
"INTERRUPT MODE." is displayed and the Interrupt indicator lights.
2. Remove the present original(s) and put it (them) aside.
3. Set the new original(s) and execute copying.
4. When copying ends, press the Interrupt key again, and replace the newly copied
original(s) with the one(s) removed before. Then, press the Start key.
The interrupted copy job will be resumed.
19
FUNCTIONS
