(1) Enlargement/reduction
1
Auto magnification selection mode
The original image is enlarged/reduced automatically according to the selected
paper size.
* When using this mode, make sure that "AMS" has been selected in "
0
AMS
MODE" on page 59.
1. Set the original(s).
The size of the original will be automatically detected and the same size paper
as the original will be selected.
2. Press the Paper Select key to specify the paper size.
The magnification ratio will be displayed.
* Copying will start when the Start key is pressed.
2
Zoom copy mode
The zoom ratio can be set to any value from 25 to 400% in 1% increments.
* If original(s) are set in the DF, the zoom ratio can be set to any value from 25 to
200%.
1. Set the original(s).
2. Press the Zoom(+) or Zoom(-) key to change the displayed zoom ratio.
* Press the Paper Select key to change the paper size.
* Copying will start when the Start key is pressed.
3
Size zoom mode
Enlarges/reduces to one of the following pre-set ratios:
25, 50, 70, 75, 90, 100, 106, 127, 141, 200, 400.
1. Set the original(s).
17
FUNCTIONS
