Triumph Adler CX 8682 Instruction Handbook Manual Download Page 81

Page: 81 / 102

CHAPTER 7 MANAGEMENT AND SETTING

7-23

(Inch)

(Metric)

(Inch)

(Metric)

(Inch)

(Metric)

Press the

▼

▲

key to select “+” or “-” and use the numeric

keys to enter the margin amount.
Set the margin amount to from -8.0" to +8.0" [-200 mm to
+200 mm].
Proceed to step 8.

Use the numeric keys to enter the border erase amount.
Set the border erase amount to from 0" to +8.0" [0 mm to
+200 mm].
Proceed to step 8.

Press the OK key.

Press the

▼

▲

key to select “Back to copy default”.

Press the OK key. The machine will return to the copy default
setting screen.

Adj. preview copy

Press the

▼

▲

key to select the desired preview copy

type.

Press the OK key. The machine will return to the copy default
setting screen.

Summary of Contents for CX 8682







































































































Search results

Summary of Contents for CX 8682

Reviews:

Related manuals for CX 8682

Brands by name

Popular brands

Triumph Adler CX 8682, Instruction Handbook Manual

Search results

Summary of Contents for CX 8682

Reviews:

Related manuals for CX 8682

Brands by name

Popular brands